| "salt" (OSSL_KDF_PARAM_SALT) <octet string> | These parameters work as described in "PARAMETERS" in EVP_KDF(3). |
| "prefix" (OSSL_KDF_PARAM_PREFIX) <octet string> | This parameter sets the label prefix on the specified TLS 1.3 KDF context. For TLS 1.3 this should be set to the ASCII string "tls13 " without a trailing zero byte. Refer to RFC 8446 section 7.1 "Key Schedule" for details. |
| "label" (OSSL_KDF_PARAM_LABEL) <octet string> | This parameter sets the label on the specified TLS 1.3 KDF context. Refer to RFC 8446 section 7.1 "Key Schedule" for details. |
| "data" (OSSL_KDF_PARAM_DATA) <octet string> | This parameter sets the context data on the specified TLS 1.3 KDF context. Refer to RFC 8446 section 7.1 "Key Schedule" for details. |
| "mode" (OSSL_KDF_PARAM_MODE) <UTF8 string> or <integer> | This parameter sets the mode for the TLS 1.3 KDF operation. There are two modes that are currently defined: |
| "EXTRACT_ONLY" or EVP_KDF_HKDF_MODE_EXTRACT_ONLY | The digest, key and salt values must be set before a key is derived otherwise an error will occur. |
| "EXPAND_ONLY" or EVP_KDF_HKDF_MODE_EXPAND_ONLY | The digest, key and info values must be set before a key is derived otherwise an error will occur. |
| "fips-indicator" (OSSL_KDF_PARAM_FIPS_APPROVED_INDICATOR) <integer> | A getter that returns 1 if the operation is FIPS approved, or 0 otherwise. This may be used after calling EVP_KDF_derive. It returns 0 if any "***-check" related parameter is set to 0 and the check fails. |
| "digest-check" (OSSL_KDF_PARAM_FIPS_DIGEST_CHECK) <integer> | According to RFC 8446, the following are approved digest algorithms: SHA2-256, SHA2-384. |
| "key-check" (OSSL_KDF_PARAM_FIPS_KEY_CHECK) <integer> | The default value of 1 causes an error during EVP_KDF_CTX_set_params() if the length of used key-derivation key (OSSL_KDF_PARAM_KEY) is shorter than 112 bits. Setting this to zero will ignore the error and set the approved "fips-indicator" to 0. This option breaks FIPS compliance if it causes the approved "fips-indicator" to return 0. |
NAME
EVP_KDF-TLS13_KDF - The TLS 1.3 EVP_KDF implementation
DESCRIPTION
Support for computing the TLS 1.3 version of the HKDF KDF through the EVP_KDF API.
The EVP_KDF-TLS13_KDF algorithm implements the HKDF key derivation function as used by TLS 1.3.
The output is considered to be keying material.
Identity
"TLS13-KDF" is the name for this implementation; it can be used with the EVP_KDF_fetch() function.
Supported parameters
The supported parameters are:
- "properties" (OSSL_KDF_PARAM_PROPERTIES) <UTF8 string>
- "digest" (OSSL_KDF_PARAM_DIGEST) <UTF8 string>
- "key" (OSSL_KDF_PARAM_KEY) <octet string>
- "salt" (OSSL_KDF_PARAM_SALT) <octet string>
These parameters work as described in "PARAMETERS" in EVP_KDF(3).
- "prefix" (OSSL_KDF_PARAM_PREFIX) <octet string>
This parameter sets the label prefix on the specified TLS 1.3 KDF context. For TLS 1.3 this should be set to the ASCII string "tls13 " without a trailing zero byte. Refer to RFC 8446 section 7.1 "Key Schedule" for details.
- "label" (OSSL_KDF_PARAM_LABEL) <octet string>
This parameter sets the label on the specified TLS 1.3 KDF context. Refer to RFC 8446 section 7.1 "Key Schedule" for details.
- "data" (OSSL_KDF_PARAM_DATA) <octet string>
This parameter sets the context data on the specified TLS 1.3 KDF context. Refer to RFC 8446 section 7.1 "Key Schedule" for details.
- "mode" (OSSL_KDF_PARAM_MODE) <UTF8 string> or <integer>
This parameter sets the mode for the TLS 1.3 KDF operation. There are two modes that are currently defined:
- "EXTRACT_ONLY" or EVP_KDF_HKDF_MODE_EXTRACT_ONLY
The digest, key and salt values must be set before a key is derived otherwise an error will occur.
- "EXPAND_ONLY" or EVP_KDF_HKDF_MODE_EXPAND_ONLY
The digest, key and info values must be set before a key is derived otherwise an error will occur.
The OpenSSL FIPS provider also supports the following parameters:
- "fips-indicator" (OSSL_KDF_PARAM_FIPS_APPROVED_INDICATOR) <integer>
A getter that returns 1 if the operation is FIPS approved, or 0 otherwise. This may be used after calling EVP_KDF_derive. It returns 0 if any "***-check" related parameter is set to 0 and the check fails.
- "digest-check" (OSSL_KDF_PARAM_FIPS_DIGEST_CHECK) <integer>
According to RFC 8446, the following are approved digest algorithms: SHA2-256, SHA2-384.
- "key-check" (OSSL_KDF_PARAM_FIPS_KEY_CHECK) <integer>
The default value of 1 causes an error during EVP_KDF_CTX_set_params() if the length of used key-derivation key (OSSL_KDF_PARAM_KEY) is shorter than 112 bits. Setting this to zero will ignore the error and set the approved "fips-indicator" to 0. This option breaks FIPS compliance if it causes the approved "fips-indicator" to return 0.
NOTES
This KDF is intended for use by the TLS 1.3 implementation in libssl. It does not support all the options and capabilities that HKDF does.
The OSSL_PARAM array passed to EVP_KDF_derive(3) or EVP_KDF_CTX_set_params(3) must specify all of the parameters required. This KDF does not support a piecemeal approach to providing these.
A context for a TLS 1.3 KDF can be obtained by calling:
EVP_KDF *kdf = EVP_KDF_fetch(NULL, "TLS13-KDF", NULL);
EVP_KDF_CTX *kctx = EVP_KDF_CTX_new(kdf);The output length of a TLS 1.3 KDF expand operation is specified via the keylen parameter to the EVP_KDF_derive(3) function. When using EVP_KDF_HKDF_MODE_EXTRACT_ONLY the keylen parameter must equal the size of the intermediate fixed-length pseudorandom key otherwise an error will occur. For that mode, the fixed output size can be looked up by calling EVP_KDF_CTX_get_kdf_size() after setting the mode and digest on the EVP_KDF_CTX.
CONFORMING TO
RFC 8446
SEE ALSO
EVP_KDF(3), EVP_KDF_CTX_new(3), EVP_KDF_CTX_free(3), EVP_KDF_CTX_get_kdf_size(3), EVP_KDF_CTX_set_params(3), EVP_KDF_derive(3), "PARAMETERS" in EVP_KDF(3), EVP_KDF-HKDF(7)
HISTORY
This functionality was added in OpenSSL 3.0.
COPYRIGHT
Copyright 2021-2024 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>.