| mode { legacy | switchdev } | legacy - Legacy SRIOV switchdev - SRIOV switchdev offloads |
| inline-mode { none | link | network | transport } | none - None link - L2 mode network - L3 mode transport - L4 mode |
| encap-mode { none | basic } | none - Disable encapsulation support basic - Enable encapsulation support |
| namePARAMETER | Specify parameter name to set. |
| valueVALUE | New value to set. |
| cmode { runtime | driverinit | permanent } | runtime - Set new value while driver is running. This configuration mode doesn't require any reset to apply the new value. driverinit - Set new value which will be applied during driver initialization. This configuration mode requires restart driver by devlink reload command to apply the new value. permanent - New value is written to device's non-volatile memory. This configuration mode requires hard reset to apply the new value. |
NAME
devlink-dev - devlink device configuration
SYNOPSIS
devlink [ OPTIONS ] dev { COMMAND | help }
OPTIONS := { -V[ersion] | -n[no-nice-names] }
devlink dev show [ DEV ]
devlink dev help
devlink dev eswitch setDEV [ mode { legacy | switchdev } ] [ inline-mode { none | link | network | transport } ] [ encap-mode { none | basic } ]
devlink dev eswitch showDEV
devlink dev param setDEVnamePARAMETERvalueVALUEcmode { runtime | driverinit | permanent }
devlink dev param show [ DEVnamePARAMETER ]
devlink dev reloadDEV [ netns { PID | NAME | ID } ] [ action { driver_reinit | fw_activate } ] [ limit no_reset ]
devlink dev info [ DEV ]
devlink dev flashDEVfilePATH [ targetID ]
devlink dev selftests show [ DEV ]
devlink dev selftests runDEV [ idID... ]
DESCRIPTION
devlink dev show - display devlink device attributes
DEV - specifies the devlink device to show. If this argument is omitted all devices are listed.
Format is: BUS_NAME/BUS_ADDRESS
devlink dev eswitch show - display devlink device eswitch attributes
devlink dev eswitch set - sets devlink device eswitch attributes
- mode { legacy | switchdev }
legacy - Legacy SRIOV
switchdev - SRIOV switchdev offloads
- inline-mode { none | link | network | transport }
none - None
link - L2 mode
network - L3 mode
transport - L4 mode
- encap-mode { none | basic }
none - Disable encapsulation support
basic - Enable encapsulation support
devlink dev param set - set new value to devlink device configuration parameter
- namePARAMETER
Specify parameter name to set.
- valueVALUE
New value to set.
- cmode { runtime | driverinit | permanent }
runtime - Set new value while driver is running. This configuration mode doesn't require any reset to apply the new value.
driverinit - Set new value which will be applied during driver initialization. This configuration mode requires restart driver by devlink reload command to apply the new value.
permanent - New value is written to device's non-volatile memory. This configuration mode requires hard reset to apply the new value.
devlink dev param show - display devlink device supported configuration parameters attributes
namePARAMETER Specify parameter name to show. If this argument is omitted all parameters supported by devlink devices are listed.
devlink dev reload - perform hot reload of the driver.
DEV - Specifies the devlink device to reload.
netns {PID|NAME|ID} - Specifies the network namespace to reload into, either by pid, name or id.
action { driver_reinit | fw_activate } - Specifies the reload action required. If this argument is omitted driver_reinit action will be used. Note that even though user asks for a specific action, the driver implementation might require to perform another action alongside with it. For example, some driver do not support driver reinitialization being performed without fw activation. Therefore, the devlink reload command returns the list of actions which were actrually performed.
driver_reinit - Driver entities re-initialization, applying devlink-param and devlink-resource values.
fw_activate - Activates new firmware if such image is stored and pending activation. If no limitation specified this action may involve firmware reset. If no new image pending this action will reload current firmware image.
limit no_reset - Specifies limitation on reload action. If this argument is omitted limit is unspecified and the reload action is not limited. In such case driver implementation may include reset or downtime as needed to perform the actions.
no_reset - No reset allowed, no down time allowed, no link flap and no configuration is lost.
devlink dev info - display device information.
Display device information provided by the driver. This command can be used to query versions of the hardware components or device components which can't be updated ( fixed ) as well as device firmware which can be updated. For firmware components running displays the versions of firmware currently loaded into the device, while stored reports the versions in device's flash. Running and stored versions may differ after flash has been updated, but before reboot.
DEV - specifies the devlink device to show. If this argument is omitted all devices are listed.
devlink dev flash - write device's non-volatile memory.
DEV - specifies the devlink device to write to.
filePATH - Path to the file which will be written into device's flash. The path needs to be relative to one of the directories searched by the kernel firmware loader, such as /lib/firmware.
componentNAME - If device stores multiple firmware images in non-volatile memory, this parameter may be used to indicate which firmware image should be written. The value of NAME should match the component names from devlink dev info and may be driver-dependent.
devlink dev selftests show - shows supported selftests on devlink device.
DEV - specifies the devlink device. If this argument is omitted all selftests for devlink devices are listed.
devlink dev selftests run - runs selftests on devlink device.
DEV - specifies the devlink device to execute selftests.
idID... - The value of ID(s) should match the selftests shown in devlink dev selftests show to execute selftests on the devlink device. If this argument is omitted all selftests supported by devlink devices are executed.
EXAMPLES
devlink dev show
devlink dev show pci/0000:01:00.0
devlink dev eswitch show pci/0000:01:00.0
devlink dev eswitch set pci/0000:01:00.0 mode switchdev
devlink dev param show pci/0000:01:00.0 name max_macs
devlink dev param set pci/0000:01:00.0 name internal_error_reset value true cmode runtime
devlink dev reload pci/0000:01:00.0
devlink dev flash pci/0000:01:00.0 file firmware.bin
devlink dev selftests show pci/0000:01:00.0
devlink dev selftests run pci/0000:01:00.0 id flash
SEE ALSO
devlink(8), devlink-port(8), devlink-sb(8), devlink-monitor(8),
AUTHOR
Jiri Pirko <[email protected]>